Performance
     Standard Pressure Ranges
     Compound Gauge: From vac up to 500 psi
     Gauge or Absolute: From 0 to 10,000 psi
     Flush Mount: 0 to 5,000 psi
     Overpressure: 2x full scale
     Burst Pressure: 10x full scale or 20,000 psi (whichever is less)
     Accuracy (linearity & hysteresis)
        Standard Diaphragm: ± 0.25% (B.F.S.L.)
        Flush Mount Diaphragm: ±1.0% or better (B.F.S.L.)
        Low Pressure Diaphragm: 15 psi min. to 30 psi max; ±1.0% or better (B.F.S.L.)
     Stability – One Year Zero Drift:
        15-5: < ±0.5% F.S., 316: < ±1% F.S.
     Zero Balance Adjust: ±1% of full scale
     Life: 10 million cycles minimum
Environmental
     Standard Compensated Temp: 0 to 130°F (-17 to 54°C)
     Extended Compensated Temp (Optional): -40 to 180°F (-40 to 82°C)
     Storage Temp: -40 to 180°F (-40 to 82°C)
     Operating Temp: -40 to 180°F (-40 to 82°C)
Electrical
     Excitation: Calibrated at 10 VDC typically; contact factory for other input V options
     Output: L9: 10 mV/V ±1%; L13: 3 mV/V ±1%; L14: 5 mV/V ± 1%
     Input Impedance: 1200 ohms minimum
     Output Impedance: Approx. 500 ohms
     Output/Input: Non isolated, floating, 4 wire
     Resolution: Infinite
Physical
     Weight: 2 oz. (57 g)
     Wetted Materials: 15-5 SS, 316L SS, or Hastelloy® C276
     Media: Compatible with 15-5 SS, 316L SS, or Hastelloy® C276
     Connector: Electrical receptacle: 4 pin bayonet PT1H-8-4 P or equivalent
     Mating Connector: PT06A-8-4S (SR) or equivalent (not included)
     Process Cavity Volume: 0.053 in.

                                                                                              Part Number
4-pin bayonet mating connector (E3)                                     509010

4-pin bayonet mating connector (E3) with cable                    509010-10XX*
*Specify, 2, 5, 10 or 25 ft.

PT-L9/L13/14 Series Datasheet

PT-L9/L13/14 Series Manual